Description
Solid state stereo power amplifier.
Introduced
1980
Discontinued
1982
Revisions
D-60 MKII: There actually exist a MKII version of this amplifier, but ARC only
made about 12 of them. They were offered only to their dealers and it was never
"officially" released.
Options
-
MSRP (US new retail)
$1,495
Specifications
| Power output | 60 watts per channel minimum RMS (both channels operating) at 8 ohms from 1 Hz to 20 kHz with less than .25% total harmonic distortion. Typically less than .02% at rated power in midband. Approximate actual power available at "clipping" (both channels operating) 150 watts (4 ohms), 75 watts (8 ohms). |
|---|---|
| Power bandwidth | |
| Frequency response | 1 Hz to 100 kHz |
| Input sensitivity | 1.1 V RMS for rated power and load |
| Input impedance | 30 K ohms |
| Output taps | |
| Output regulation | |
| Overall negative feedback | |
| Damping factor | More than 500 at rated power and load |
| Distortion | Intermodulation distortion: Less than .1% at rated output |
| Slew rate | |
| Rise time | |
| Hum & noise | Wide band unweighted, more than 90db below 60 watts at 8 ohms-power line components (Hum) more than 80 db below 60 watts at 8 ohms |
| Power supply energy storage | |
| Power requirements | 105-120/210-240 VAC 50/60 Hz 600 watts maximum. 120 watts at idle. 300 watts at rated power. |
| Other | |
| Dimensions | 19" W x 5 ¼" H x 10 ½" D. Handles extend 1 ½" forward of the front panel. (Standard rack mount panel) |
| Weight | 38 lbs. Net, 45 lbs. Shipping |
Reviews
Pictures
 |
 |
 |
 |
 |